Facebook Pixel Code
menu_icon menu_icon Menu
location_arrow location_arrow Location

Your Insulation Solutions Experts for Over 3 Generations

Estimates & Service

Phone+1-877-281-6900 Service AreasService Areas

Attic Insulation in Kilworth

Posted on

The cost to heat, and cool our homes seems to grow every year, and many homeowners are looking for affordable ways to conserve energy within their homes. Though insufficient attic insulation for your home in Kilworth is one of the leading causes of heat and cool air loss, the attic space is often overlooked when considering efficient solutions to energy loss.

Having quality attic insulation installed by a reputable attic insulation contractor is the most cost-effective way to combat heat, and cool air loss, maintain the health of your roofing system, and make your home as comfortable as possible. At AM Insulation Solutions, we are committed to providing our customers with the most up to date attic insulation solutions available.

As an Owens Corning Certified Energy Expert, we utilise thermal imaging technology to ensure that every area of heat loss pertaining to the attic space, is properly rectified. Our use of thermal technology also acts as a visual aid, providing our customers with physical proof of their heat, and cool air loss issues.

We use top of the line, blown in insulation in Kilworth, for every attic improvement that we complete. Our attic insulation specialists are thoroughly trained in house, fully insured, and certified beyond industry standards. Stop wasting your hard-earned money, contact the attic insulation experts at AM Insulations Solutions. AM Insulation Solutions is a division of the AM Group of Companies.

  • R-value

R-value is the unit used to measure the resistance to heat flow of an insulating material, such as blown in insulation in Kilworth. The greater the R-value of the material, the better its thermal resistance. The recommended R-value for your area will be largely dependent on the type of climate in which you live.

In the province of Ontario, the recommended standard for attic insulation in Kilworth, is currently an R60 level, which translates to 22.5 inches. Maintaining this depth will ensure optimal energy efficiency within your home. When deciding on which attic insulation material is right for your home, R-value should always be considered.

Maintaining the recommended R-value for your attic space is integral in reducing the cost of your heating and cooling bills, whether in the summer, or winter seasons. During the summer months, when heat and humidity are on the rise, A/C is often our only refuge.

This heat can penetrate your roofing system, causing the temperature within your attic space to rise substantially. If your attic space is lacking sufficient attic insulation, or has not been properly air sealed, this hot air can be forced down into your living space. When this occurs, your A/C is forced to work twice as hard in an attempt to maintain a consistent temperature throughout your home.

This issue can end up costing you an exceptional amount on your energy bills. This issue can also cause some areas of your home to be unable to cool down efficiently, reducing your level of home comfort.

The cost of energy use in Ontario is already through the roof, ensure that you are benefitting fully from the energy you use to heat, and cool your homes, by contacting a reliable contractor for blown in attic insulation in Kilworth. Don’t delay, rectify your attic insulation issues as soon as possible, and start saving money right away!

Attic Insulation and Your Roofing System

Attic insulation in Kilworth is important for more than just lowering your energy costs, and keeping your home comfortable. Insufficient attic insulation in Kilworth, combined with a lack of attic ventilation and air sealing, can lead to significant issues regarding your roofing system.

The air within your attic space, when at proper R-value, should remain the same temperature as the air outside. In the wintertime, the majority of our homes will spend the season snow covered, and the use of our furnaces is a necessity. Without sufficient attic insulation or air sealing, this heat can rise into your attic space causing a temperature increase, and melting the snow upon your roof.

This water will then run down your roof before refreezing along the edges of your roofing system, and within your eavestrough. This is an issue referred to as ice damming. If left without repair, these ice dams can prevent future melts from draining properly, and leading to an increased likelihood of leak issues within your attic space.

If this water finds its way under your shingles before freezing, damage to your roof boards and other roofing material is likely. Ice dams can also cause an untold amount of damage to your eavestrough system as well. If you have noticed an abundance of icicles along your eavestrough, or unusual bare spots on your roof where there should be snow, your attic insulation is likely the issue. Save yourself the headaches, contact the experts at AM Insulation Solutions for a thorough attic inspection.

  • Owens Corning Pro Pink Attic Insulation

Owens Corning Pro Pink attic insulation in Kilworth is a premium, and eco friendly fibreglass insulating material. This blown in insulation in Kilworth, is made from 70% recycled materials, and has been thoroughly tested to ensure that it contains no indoor air pollutants. Due to its fibreglass make up, this product is moisture resistant and can dry quickly, making it far less likely to encourage mold growth.

Owens Corning Pro Pink blown in insulation in Kilworth is non-combustible, making it safe for use in a variety of spaces. This premium attic insulation is also highly durable, and can last for many years without any reduction in its R-value. Owens Corning Pro Pink attic insulation in Kilworth is the number one insulation choice for home builders, and attic insulation contractors in Ontario.

  • Fibreglass Vs Cellulose Vs Spray Foam


  • Fibreglass attic insulation in Kilworth is a cost effective, widely used insulating material with a moderate R-value that can be layered for improved insulation. It is moisture resistant and does not harm air quality, making it a safe and long-lasting option.


  • Cellulose attic insulation in Kilworth is composed of recycled paper and cloth and is fire retardant. It has a higher R-value than fibreglass, but is more expensive. Unfortunately, it can sag over time and is not very water resistant, making it more susceptible to mold development.

Spray Foam

  • Spray foam insulation has the highest R-value but is also the most expensive. It can effectively seal air leaks and must be applied by a certified professional. However, it is not eco-friendly and can cause allergic reactions and should never be applied to damp roof boards. If replacement is needed, it is difficult to remove and should be thoroughly researched before making a decision.

If you have been searching for a reliable attic insulation contractor, contact AM Insulation Solutions today, for a complimentary attic inspection, and quote.

Attic Insulation in Kilworth