menu_icon menu_icon Menu
location_arrow location_arrow Location

Your Insulation Solutions Experts for Over 3 Generations

Estimates & Service

Phone+1-877-281-6900 Service AreasService Areas

Attic Insulation in Midland, ON

Posted on

Your attic space plays a crucial role in your homes energy conservation, as this is where the majority of your energy loss occurs. When installed correctly, by a reputable attic insulation contractor, attic insulation in Midland can help to save you up to 28% on your energy bills. At AM Insulation Solutions, we are committed to providing our customers with the most cost-effective, and up to date attic insulation solutions available. As a division of the AM Group of Companies, we are held to the highest standards for customer service, quality workmanship. As an Owens Corning Certified Energy Expert, we use thermal technology to ensure that every air leak is sealed, and all points of heat loss are rectified. Our attic insulation experts are highly trained, sufficiently certified and fully insured. Our attic insulation products are made of the highest quality material, and are eco friendly. From attic inspection to attic insulation application our friendly and knowledgeable staff are always on hand to answer any questions, and address any concerns that you may have.

  • R-value

R-value measures the ability of a material, such as attic insulation in Midland, to resist heat flow. The greater the R-value, the better the thermal resistance of the insulating material. In the province of Ontario, the current recommended standard for attic insulation depth is R60, or 22.5 inches. Attic insulation in Midland, at this depth will ensure maximum energy efficiency within your home is acheived.

In the summer months, the use of A/C is often necessary to maintain a comfortable temperature within our homes, though it can be quite costly even on a good day. Without sufficient levels of blown in insulation in Midland, the heat from your attic space can be forced down into your living space, causing you’re A/C to work much harder than it should to keep your home cool, costing you an exorbitant amount on your energy bills. A lack of proper attic insulation in Midland can also cause uncomfortable temperature changes throughout your home, with some rooms unable to maintain a consistent temperature. In our climate, the use of our furnace in the winter time can be a pricey, yet undeniably necessary fact of life. However, not ensuring that your attic insulation has the correct R-value, or taking care to have air leaks sealed, can cause a significant portion of that heat to simply float right out of your roof. If you have noticed some rooms remaining cold, while others are toasty warm, you may have attic insulation issues. To know for sure, contact a reliable attic insulation contractor, like AM Insulation Solutions for a complimentary, thermal attic inspection.

Attic Insulation and Your Roofing System

If energy saving and home comfort aren’t good enough reasons to take a closer look at your attic insulation situation, consider the impact it can have on your roofing system. Your roofing system is one of the most expensive parts of your home, when it comes to a repair or replacement, and by ensuring that your attic insulation is up to par, you can help to protect both its health, and lifespan.   During the winter months, your attic space should have the ability to remain the same temperature as the air outside. This can be accomplished by ensuring that your attic space contains the recommended amount of blown in insulation in Midland, as well as sufficient ventilation and air sealing. If the heat from your home is able to invade your attic space, ice buildup on your rooftop can occur. This issue is referred to as ice damming. Ice damming happens when the heated air within your attic space melts the snow on your roofing system, causing it to refreeze along the edges of your roof, and within your eavestrough. Once ice dams have formed, they can prevent future water from properly draining, leading to extensive leaks within your attic space. If this water seeps beneath your shingles prior to freezing, it can cause them to lift, and damage to your roof boards is likely. These issues can cause extensive damage to your roofing system, your eavestrough, and in the event of leakage, can cause a large amount of damage to the inside of your home as well. A roofing system replacement is one of the most expensive home improvements that you can make, help keep it in good condition by ensuring that your blown in insulation in Midland, meets the recommended provincial standards.

  • Owens Corning Pro Pink Attic Insulation

Owens Corning is the number one attic insulation manufacturer in Ontario. This product is made of mostly recycled materials and has been thoroughly tested to ensure that it contains no indoor air pollutants. Owens Corning Pro Pink attic insulation in Midland, is highly durable and can last for many years with no reduction in R-value. Its moisture resistance reduces the likelihood of mold development, as well. When installed competently, this product can save you up to 28% on your heating and cooling costs.

  • Fiberglass Vs Cellulose Vs Spray Foam

Fiberglass

  • Fiberglass attic insulation in Midland, is one of the least expensive insulation materials on the market. It is highly durable, long lasting, and holds a moderate R-value. Its ability to hold this R-value for years, is one of the many reasons why it is one of the most used types of blown in insulation in Midland, for builders, and contractors. Due to its material, this product is incredibly resistant to water damage, resulting in a decreased chance for mold development.

Cellulose

  • Cellulose holds a slightly higher R-value than fiberglass, though it does tend to be more expensive. Cellulose is made up of recycled paper and cloth, and as such is fairly eco friendly. This material is susceptible to water damage, and therefore is more likely to experience mold growth. Cellulose is known to lose its form over time, resulting in a significant reduction in its R-value, and prompting more constant replacement.

Spray Foam

  • Spray Foam holds the highest R-value of any material on this list, and is also the most expensive by a large margin. Unlike fiberglass and cellulose, which may require hand caulking to ensure all air leaks are sealed, the expansion capabilities of spray foam allow it to seep into cracks, and gaps, effectively sealing them. Spray foam has been known to cause irritations and allergic reactions in some individuals, so be sure to research this product extensively prior to purchase. This blown in insulation in Midland should not be applied to moist roof boards, as it can cause rapid deterioration to occur. This product is also often difficult to remove, so careful consideration should be taken prior to installation.

Midland, is located in Simcoe County, in Central Ontario. Midland sits on the southern end of Georgian Bays, 30,000 Islands. This town is a major tourist destination in the summer months, with a plethora of cottages, and breathtaking provincial and national parks. The nearby Wye Marsh Wildlife Centre, is a popular destination for school field trips and nature enthusiasts, alike.

For a complimentary thermal attic inspection and quote, contact the experts in blown in attic insulation in Midland, AM Insulation Solutions.

top
1-877-281-6900